4allShare
DownloadSend files from your Windows PC to any other device on your network — instantly, privately, with no internet connection and no account required. Just drop a file and share.
4allShare turns your Windows PC into a local file-sharing station. It scans your network automatically, finds every device running a compatible receiver, and lets you drop a file or folder directly to any of them — no cables, no USB sticks, no uploading to a cloud service first. Every transfer is encrypted end-to-end using AES-256, so the data cannot be read by anyone else on the network. A built-in chat lets you message any peer directly.
Peer Discovery
What is a local network? A local network — often called a LAN (Local Area Network) — is the private network created by your router at home or in an office. Every device connected to the same router, whether by Wi-Fi or cable, shares this network. Data sent between devices on a LAN never leaves your building and never travels through the internet.
What is peer discovery? Peer discovery is the process of an application automatically finding other compatible devices on the same network without you having to look up IP addresses or configure anything. The app broadcasts a signal on the network, and any other device running the same app responds, making itself visible.
The problem. Sharing a file from one PC to another on the same network usually means looking up an IP address, configuring a shared folder, or switching to a cloud service. For a quick file transfer between two machines in the same room, that is unnecessary friction.
How 4allShare helps. When you open 4allShare, it immediately scans your local network and builds a live list of every compatible device it finds — showing each device's name, operating system, estimated connection speed, and preferred protocol. The list refreshes automatically every two seconds, so a device that joins the network appears almost instantly. You pick a peer from the list and you are ready to send.
What this means for you. You open the app, see the available devices, pick one, and send. There is no setup, no configuration, and no need to know any network details.
Send Files and Folders
What is AES-256 encryption? AES-256 (Advanced Encryption Standard with a 256-bit key) is a widely adopted encryption standard trusted by governments, banks, and security agencies worldwide. When a file is encrypted with AES-256, its contents are mathematically scrambled and can only be unscrambled by the recipient — anyone else who intercepts the data on the network sees meaningless noise.
The problem. Sending large files — a video, a folder of project files, a batch of photos — over a network usually means compressing them first, uploading to a cloud service, sharing a link, and waiting for the recipient to download. If you are in the same building, this round trip through external servers is slow, wasteful, and exposes your data to a third party unnecessarily.
How 4allShare helps. Select the destination peer from the discovery list, then drag a file, folder, or multiple files into the drop zone. 4allShare sends the data directly to the recipient's machine over the local network, encrypted with AES-256 end-to-end. A live progress card shows the percentage complete, transfer speed in Megabits per second, and estimated remaining time. You can pause, resume, or cancel any transfer at any point.
What this means for you. Large files reach another machine in your building at full local network speed — often tens or hundreds of times faster than a cloud upload — and no third party ever touches the data.
Receive Files
The problem. Receiving files should be as simple as sending them. But if the receiving PC is not set up and listening, an incoming transfer has nowhere to go. And if the receiver automatically accepts everything, it creates an obvious security risk — anyone on the network could push files to your machine.
How 4allShare helps. On the Receive screen you start the listener with one click. When an incoming transfer arrives, a card appears showing the sender's name, the file name, and its size. You accept or reject it individually. Accepted files are saved to a folder you configured in Settings — your Downloads folder by default. A progress bar shows the incoming transfer's progress in real time.
What this means for you. Your machine only accepts files you explicitly approve. You can run the receiver in the background and handle incoming transfers when you are ready.
QR Share Sessions
What is a QR code? A QR code is a square barcode that encodes a small piece of text — typically a web address. Any smartphone or tablet camera can scan a QR code and open the encoded address in a browser or app. QR codes are commonly used on receipts, signs, and product packaging to give people a quick way to reach a URL without typing it out.
The problem. Sometimes you want to share a file with a device that is not running 4allShare — a phone, a tablet, a colleague's laptop. The direct peer-to-peer transfer requires the app on both ends. For cross-device or cross-platform transfers, you need a different approach.
How 4allShare helps. Select a file and open a share session. The app generates a temporary download link and displays it both as text and as a QR code. Any device on the same network can scan the QR code with its camera and download the file through a standard browser — no app installation required. The session expires automatically after 12 minutes, with a live countdown so you know how long it remains active. You can copy the session URL to send it by message if that is more convenient.
What this means for you. You can share a file with a phone, smart TV, or any other device on the network with a single scan — no extra software, no cloud upload, no account.
Peer-to-Peer Chat
The problem. When collaborating with someone in the same building, coordinating a file transfer often requires a separate messaging app — often one that routes messages through external servers. For quick questions about a transfer or brief notes to accompany a shared file, that overhead is unnecessary.
How 4allShare helps. From the peer list, open a chat with any discovered device on your network. Messages are sent directly between the two machines over the local network — they do not leave your building. You can maintain separate chat sessions with multiple peers and switch between them from the peer list.
What this means for you. Brief coordination messages — "did you get the files?", "use the second folder" — go directly to the recipient without routing through any external service.
Cloud Relay
What is a cloud relay? A cloud relay is an intermediate storage point in the cloud that holds a file temporarily so a recipient who is not on the same network can download it. Instead of sending directly to a device, you upload the file to cloud storage and share the download link. The recipient retrieves it at their convenience.
The problem. Local network transfers are fast and private, but they only work when both devices are on the same network at the same time. If a colleague is working remotely, or if you need to send something to a device on a different network, direct peer-to-peer is not possible.
How 4allShare helps. The Cloud Relay tab lets you upload a file to Google Drive, Microsoft OneDrive, Dropbox, or the proprietary 4all relay server directly from the app. A live upload progress bar shows percentage and speed. The upload can be cancelled at any point. OAuth authentication — the process of connecting your cloud account — is handled inside 4allShare; you log in once and your credentials are stored securely for future sessions.
What this means for you. When a direct peer transfer is not possible, you have a one-click fallback that works with the cloud services you already use.
What is the difference between LAN sharing and cloud sharing?
LAN (local network) sharing sends data directly from one device to another through your router — no internet connection required, and no data leaves your building. Cloud sharing uploads the file to an external server and the recipient downloads it from there. LAN sharing is typically much faster — a local gigabit network can transfer a 1 GB file in under 10 seconds — while cloud speeds depend on your internet connection and can be significantly slower for large files.
What does end-to-end encryption mean for a file transfer?
End-to-end encryption means the file is encrypted on the sending device and only decrypted on the receiving device. Any device in between — a router, a switch, a network observer — sees only scrambled data that it cannot read. In 4allShare, AES-256 encryption is applied to every transfer automatically; there is no unencrypted mode.
What is a bandwidth limit and why would I use one?
A bandwidth limit caps how much of your network connection 4allShare is allowed to use for outbound transfers. If you are on a shared network where multiple people are streaming video or making calls, an unlimited file transfer could crowd out the other traffic. Setting a bandwidth cap in Settings lets 4allShare coexist politely with other activity on the same network.
What is a transfer history?
The transfer history is a log of every file you have sent or received — the file name, the peer it went to or came from, the size, the direction, the status, how long it took, and the transfer speed. 4allShare keeps this history in a local database so you can verify that a previous transfer completed or look up which file was sent on a given day.
| Requirement | Details |
|---|---|
| Operating system | Windows 10 or Windows 11 (64-bit) |
| Architecture | x64 |
| Network | Local area network (LAN) required for peer transfers. Internet required for cloud relay only. |
| Component | Role |
|---|---|
| AES-256 | End-to-end encryption on every peer-to-peer transfer — always on, cannot be disabled |
| Audit log | Full event history of all transfers, stored locally |
| No account required | Peers are identified by ephemeral session IDs — no sign-in, no personal data collected |
| Provider |
|---|
| Google Drive |
| Microsoft OneDrive |
| Dropbox |
| 4all Relay (ProgInsight proprietary) |
All peer-to-peer transfers run entirely on your local network. No file data is sent to ProgInsight servers. Cloud relay uploads send data only to the cloud provider you select, using your own credentials. No usage analytics or telemetry are collected.
Does 4allShare work without an internet connection?
Yes. All peer discovery, file sending, receiving, and QR share sessions work entirely on your local network with no internet connection. Cloud relay is the only feature that requires internet access.
Can I send to a phone or tablet?
Yes, via QR share. Generate a session for the file and scan the QR code with the device's camera — the file downloads through the browser. For peer-to-peer transfers, the receiving device currently needs 4allShare installed.
Is there a file size limit?
No file size limit is imposed by 4allShare. The practical limit is your available disk space on both ends and the speed of your network.
Can I transfer to someone outside my network?
Not directly via peer transfer — that requires both devices on the same LAN. Use the cloud relay feature to upload and share a link with someone on a different network.
Is my transfer data stored anywhere?
A transfer history (file names, peer names, sizes, timestamps) is stored in a local database on your machine. No file contents are stored after the transfer completes.